#
ControlNet with Flux.1

FluxControlNetPipeline is an implementation of ControlNet for Flux.1.

ControlNet was introduced in Adding Conditional Control to Text-to-Image Diffusion Models by Lvmin Zhang, Anyi Rao, and Maneesh Agrawala.

With a ControlNet model, you can provide an additional control image to condition and control Stable Diffusion generation. For example, if you provide a depth map, the ControlNet model generates an image that’ll preserve the spatial information from the depth map. It is a more flexible and accurate way to control the image generation process.

The abstract from the paper is:

We present ControlNet, a neural network architecture to add spatial conditioning controls to large, pretrained text-to-image diffusion models. ControlNet locks the production-ready large diffusion models, and reuses their deep and robust encoding layers pretrained with billions of images as a strong backbone to learn a diverse set of conditional controls. The neural architecture is connected with “zero convolutions” (zero-initialized convolution layers) that progressively grow the parameters from zero and ensure that no harmful noise could affect the finetuning. We test various conditioning controls, eg, edges, depth, segmentation, human pose, etc, with Stable Diffusion, using single or multiple conditions, with or without prompts. We show that the training of ControlNets is robust with small (<50k) and large (>1m) datasets. Extensive results show that ControlNet may facilitate wider applications to control image diffusion models.

This controlnet code is implemented by The InstantX Team. You can find pre-trained checkpoints for Flux-ControlNet in the table below:

ControlNet type | Developer | Link
--- | --- | ---
Canny | The InstantX Team | Link
Depth | The InstantX Team | Link
Union | The InstantX Team | Link

XLabs ControlNets are also supported, which was contributed by the XLabs team.

ControlNet type | Developer | Link
--- | --- | ---
Canny | The XLabs Team | Link
Depth | The XLabs Team | Link
HED | The XLabs Team | Link

Make sure to check out the Schedulers guide to learn how to explore the tradeoff between scheduler speed and quality, and see the reuse components across pipelines section to learn how to efficiently load the same components into multiple pipelines.

##
FluxControlNetPipeline

###
class diffusers.FluxControlNetPipeline

< source >

( scheduler: FlowMatchEulerDiscreteScheduler vae: AutoencoderKL text_encoder: CLIPTextModel tokenizer: CLIPTokenizer text_encoder_2: T5EncoderModel tokenizer_2: T5TokenizerFast transformer: FluxTransformer2DModel controlnet: typing.Union[diffusers.models.controlnets.controlnet_flux.FluxControlNetModel, typing.List[diffusers.models.controlnets.controlnet_flux.FluxControlNetModel], typing.Tuple[diffusers.models.controlnets.controlnet_flux.FluxControlNetModel], diffusers.models.controlnets.controlnet_flux.FluxMultiControlNetModel] )

Parameters

- transformer (FluxTransformer2DModel) — Conditional Transformer (MMDiT) architecture to denoise the encoded image latents.
- scheduler (FlowMatchEulerDiscreteScheduler) — A scheduler to be used in combination with `transformer` to denoise the encoded image latents.
- vae (AutoencoderKL) — Variational Auto-Encoder (VAE) Model to encode and decode images to and from latent representations.
- text_encoder (`CLIPTextModel`) — CLIP, specifically the clip-vit-large-patch14 variant.
- text_encoder_2 (`T5EncoderModel`) — T5, specifically the google/t5-v1_1-xxl variant.
- tokenizer (`CLIPTokenizer`) — Tokenizer of class CLIPTokenizer.
- tokenizer_2 (`T5TokenizerFast`) — Second Tokenizer of class T5TokenizerFast.

The Flux pipeline for text-to-image generation.

Reference: https://blackforestlabs.ai/announcing-black-forest-labs/

####
__call__

< source >

( prompt: typing.Union[str, typing.List[str]] = None prompt_2: typing.Union[str, typing.List[str], NoneType] = None height: typing.Optional[int] = None width: typing.Optional[int] = None num_inference_steps: int = 28 timesteps: typing.List[int] = None guidance_scale: float = 7.0 control_guidance_start: typing.Union[float, typing.List[float]] = 0.0 control_guidance_end: typing.Union[float, typing.List[float]] = 1.0 control_image: typing.Union[PIL.Image.Image, numpy.ndarray, torch.Tensor, typing.List[PIL.Image.Image], typing.List[numpy.ndarray], typing.List[torch.Tensor]] = None control_mode: typing.Union[int, typing.List[int], NoneType] = None controlnet_conditioning_scale: typing.Union[float, typing.List[float]] = 1.0 num_images_per_prompt: typing.Optional[int] = 1 generator: typing.Union[torch._C.Generator, typing.List[torch._C.Generator], NoneType] = None latents: typing.Optional[torch.FloatTensor] = None prompt_embeds: typing.Optional[torch.FloatTensor] = None pooled_prompt_embeds: typing.Optional[torch.FloatTensor] = None output_type: typing.Optional[str] = 'pil' return_dict: bool = True joint_attention_kwargs: typing.Optional[typing.Dict[str, typing.Any]] = None callback_on_step_end: typing.Optional[typing.Callable[[int, int, typing.Dict], NoneType]] = None callback_on_step_end_tensor_inputs: typing.List[str] = ['latents'] max_sequence_length: int = 512 ) →
`~pipelines.flux.FluxPipelineOutput` or `tuple`

Parameters

- prompt (`str` or `List[str]`, optional) — The prompt or prompts to guide the image generation. If not defined, one has to pass `prompt_embeds`. instead.
- prompt_2 (`str` or `List[str]`, optional) — The prompt or prompts to be sent to `tokenizer_2` and `text_encoder_2`. If not defined, `prompt` is will be used instead
- height (`int`, optional, defaults to self.unet.config.sample_size * self.vae_scale_factor) — The height in pixels of the generated image. This is set to 1024 by default for the best results.
- width (`int`, optional, defaults to self.unet.config.sample_size * self.vae_scale_factor) — The width in pixels of the generated image. This is set to 1024 by default for the best results.
- num_inference_steps (`int`, optional, defaults to 50) — The number of denoising steps. More denoising steps usually lead to a higher quality image at the expense of slower inference.
- timesteps (`List[int]`, optional) — Custom timesteps to use for the denoising process with schedulers which support a `timesteps` argument in their `set_timesteps` method. If not defined, the default behavior when `num_inference_steps` is passed will be used. Must be in descending order.
- guidance_scale (`float`, optional, defaults to 7.0) — Guidance scale as defined in Classifier-Free Diffusion Guidance. `guidance_scale` is defined as `w` of equation 2. of Imagen Paper. Guidance scale is enabled by setting `guidance_scale > 1`. Higher guidance scale encourages to generate images that are closely linked to the text `prompt`, usually at the expense of lower image quality.
- control_guidance_start (`float` or `List[float]`, optional, defaults to 0.0) — The percentage of total steps at which the ControlNet starts applying.
- control_guidance_end (`float` or `List[float]`, optional, defaults to 1.0) — The percentage of total steps at which the ControlNet stops applying.
- control_image (`torch.Tensor`, `PIL.Image.Image`, `np.ndarray`, `List[torch.Tensor]`, `List[PIL.Image.Image]`, `List[np.ndarray]`, — `List[List[torch.Tensor]]`, `List[List[np.ndarray]]` or `List[List[PIL.Image.Image]]`): The ControlNet input condition to provide guidance to the `unet` for generation. If the type is specified as `torch.Tensor`, it is passed to ControlNet as is. `PIL.Image.Image` can also be accepted as an image. The dimensions of the output image defaults to `image`’s dimensions. If height and/or width are passed, `image` is resized accordingly. If multiple ControlNets are specified in `init`, images must be passed as a list such that each element of the list can be correctly batched for input to a single ControlNet.
- controlnet_conditioning_scale (`float` or `List[float]`, optional, defaults to 1.0) — The outputs of the ControlNet are multiplied by `controlnet_conditioning_scale` before they are added to the residual in the original `unet`. If multiple ControlNets are specified in `init`, you can set the corresponding scale as a list.
- control_mode (`int` or `List[int]`,, optional, defaults to None) — The control mode when applying ControlNet-Union.
- num_images_per_prompt (`int`, optional, defaults to 1) — The number of images to generate per prompt.
- generator (`torch.Generator` or `List[torch.Generator]`, optional) — One or a list of torch generator(s) to make generation deterministic.
- latents (`torch.FloatTensor`, optional) — Pre-generated noisy latents, sampled from a Gaussian distribution, to be used as inputs for image generation. Can be used to tweak the same generation with different prompts. If not provided, a latents tensor will ge generated by sampling using the supplied random `generator`.
- prompt_embeds (`torch.FloatTensor`, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from `prompt` input argument.
- pooled_prompt_embeds (`torch.FloatTensor`, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from `prompt` input argument.
- output_type (`str`, optional, defaults to `"pil"`) — The output format of the generate image. Choose between PIL: `PIL.Image.Image` or `np.array`.
- return_dict (`bool`, optional, defaults to `True`) — Whether or not to return a `~pipelines.flux.FluxPipelineOutput` instead of a plain tuple.
- joint_attention_kwargs (`dict`, optional) — A kwargs dictionary that if specified is passed along to the `AttentionProcessor` as defined under `self.processor` in diffusers.models.attention_processor.
- callback_on_step_end (`Callable`, optional) — A function that calls at the end of each denoising steps during the inference. The function is called with the following arguments: `callback_on_step_end(self: DiffusionPipeline, step: int, timestep: int, callback_kwargs: Dict)`. `callback_kwargs` will include a list of all tensors as specified by `callback_on_step_end_tensor_inputs`.
- callback_on_step_end_tensor_inputs (`List`, optional) — The list of tensor inputs for the `callback_on_step_end` function. The tensors specified in the list will be passed as `callback_kwargs` argument. You will only be able to include variables listed in the `._callback_tensor_inputs` attribute of your pipeline class.
- max_sequence_length (`int` defaults to 512) — Maximum sequence length to use with the `prompt`.

Returns

`~pipelines.flux.FluxPipelineOutput` or `tuple`

`~pipelines.flux.FluxPipelineOutput` if `return_dict` is True, otherwise a `tuple`. When returning a tuple, the first element is a list with the generated images.

Function invoked when calling the pipeline for generation.

Examples:

    >>> import torch
    >>> from diffusers.utils import load_image
    >>> from diffusers import FluxControlNetPipeline
    >>> from diffusers import FluxControlNetModel

    >>> controlnet_model = "InstantX/FLUX.1-dev-controlnet-canny"
    >>> controlnet = FluxControlNetModel.from_pretrained(controlnet_model, torch_dtype=torch.bfloat16)
    >>> pipe = FluxControlNetPipeline.from_pretrained(
    ...     base_model, controlnet=controlnet, torch_dtype=torch.bfloat16
    ... )
    >>> pipe.to("cuda")
    >>> control_image = load_image("https://huggingface.co/InstantX/SD3-Controlnet-Canny/resolve/main/canny.jpg")
    >>> prompt = "A girl in city, 25 years old, cool, futuristic"
    >>> image = pipe(
    ...     prompt,
    ...     control_image=control_image,
    ...     control_guidance_start=0.2,
    ...     control_guidance_end=0.8,
    ...     controlnet_conditioning_scale=1.0,
    ...     num_inference_steps=28,
    ...     guidance_scale=3.5,
    ... ).images[0]
    >>> image.save("flux.png")

####
encode_prompt

< source >

( prompt: typing.Union[str, typing.List[str]] prompt_2: typing.Union[str, typing.List[str]] device: typing.Optional[torch.device] = None num_images_per_prompt: int = 1 prompt_embeds: typing.Optional[torch.FloatTensor] = None pooled_prompt_embeds: typing.Optional[torch.FloatTensor] = None max_sequence_length: int = 512 lora_scale: typing.Optional[float] = None )

Parameters

- prompt (`str` or `List[str]`, optional) — prompt to be encoded
- prompt_2 (`str` or `List[str]`, optional) — The prompt or prompts to be sent to the `tokenizer_2` and `text_encoder_2`. If not defined, `prompt` is used in all text-encoders
- device — (`torch.device`): torch device
- num_images_per_prompt (`int`) — number of images that should be generated per prompt
- prompt_embeds (`torch.FloatTensor`, optional) — Pre-generated text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, text embeddings will be generated from `prompt` input argument.
- pooled_prompt_embeds (`torch.FloatTensor`, optional) — Pre-generated pooled text embeddings. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, pooled text embeddings will be generated from `prompt` input argument.
- clip_skip (`int`, optional) — Number of layers to be skipped from CLIP while computing the prompt embeddings. A value of 1 means that the output of the pre-final layer will be used for computing the prompt embeddings.
- lora_scale (`float`, optional) — A lora scale that will be applied to all LoRA layers of the text encoder if LoRA layers are loaded.

##
FluxPipelineOutput

###
class diffusers.pipelines.flux.pipeline_output.FluxPipelineOutput

< source >

( images: typing.Union[typing.List[PIL.Image.Image], numpy.ndarray] )

Parameters

- images (`List[PIL.Image.Image]` or `np.ndarray`) — List of denoised PIL images of length `batch_size` or numpy array of shape `(batch_size, height, width, num_channels)`. PIL images or numpy array present the denoised images of the diffusion pipeline.

Output class for Stable Diffusion pipelines.

< > Update on GitHub